Epson 610 manual Interface Specifications, USB Specifications, Configuration, Pin No Signal

EPSON Perfection 610 Revision B

1.3 Interface Specifications

This section provides specifications of the USB, the only interface supported by the Perfection 610.

1.3.1 USB Specifications

Any items not included in this specification shall be in compliance with Universal Serial Bus Specification Revision 1.0.

￿Configuration:	See Table 1-2.
Electric specification:	Compliant to Full Speed mode (12Mbit/s) of
	Universal Serial Bus Specification Revision
	1.0.
￿Connector:	One Receptacle (Series B)

Connector Pin Assignment: See the following figure.

21

3 4

Figure 1-3. Connector Pin Location

Table 1-1. Connector Pin Assignment

Pin No.	Signal
1	VCC
2	-Data
3	+Data
4	GND

		Table 1-2.	Configuration
Element			Description
	•	Class:	Vendor specific
	•	Subclass:	Vendor specific
	•	Protocol:	Vendor specific
Device	•	Maximum packet size for endpoint 0:		8byte
	•	Vendor ID:	0x04B8 (Seiko EPSON Corp.)
	•	Product ID:	0x0103
	•	Number of possible configurations:		1
	• Number of interfaces supported by this configuration: 1
Configuration	•	Characteristics: Self-powered
	• Remote wake up feature: Not supported
	• Maximum of possible consumption: 2mA
	•	No Alternate setting
	• Number of endpoints used by
Interface		this interface (excluding endpoint 0):		2
	•	Class:	Vendor specific
	•	Subclass:	Vendor specific
	•	Protocol:	Vendor specific
Endpoint 1	•	Bulk IN transfer
	• Maximum data transfer size: 64 byte
Endpoint 2	•	Bulk OUT transfer
	• Maximum data transfer size: 64 byte
String	•	iManufacturer:	“EPSON”
Descriptor	•	iProduct:	“Scanner GT-6600” or “Perfection610”

Product Description Interface Specifications 11