Epson 610 Power Supply Board Removal, Following steps, manually move the carriage

EPSON Perfection 610 Revision B

4.2.9 Power Supply Board Removal

1.Release the Carriage Lock. (See Section 4.2.1.)

2.Remove the Document Cover. (See Section 4.2.2.)

3. Remove the Upper Housing. (See Section 4.2.3.)

In the following steps, manually move the carriage

C A U T I O N

back and forth slowly if necessary.

AC Cable Connector for the AC Cable

4. Release the locking connector (pull and release) for the Panel Board, and then disconnect the cable from the Power Supply Board.

(Refer to Figure 4-30.)

Figure 4-31. Connectors for the Power Supply Board

5.Disconnect the locking connector (pick and release) for the AC cable from the Power Supply Board.

Assembly and Disassembly Disassembly Procedures 41