Epson 610 manual Inverter Lamp / Inverter Board Removal, Carriage Unit Disassembly

EPSON Perfection 610 Revision B

4.2.4 Inverter Lamp / Inverter Board Removal

1.Release the Carriage Lock. (See Section 4.2.1.)

2.Remove the Document Cover. (See Section 4.2.2.)

3.Remove the Upper Housing. (See Section 4.2.3.)

4.Remove the two screws (CCP, M3x8) on the Carriage Unit. (See Figure 4-8.)

5.Using a standard screw driver, lift up the carriage cover in the Carriage Unit, and then move it to the front to remove it. (See Figure 4-9.)

CCP Screws (M3x8)

Figure 4-8. Carriage Unit Disassembly (1)

Figure 4-9. Carriage Unit Disassembly (2)

Assembly and Disassembly Disassembly Procedures 30