EPSON Perfection 610 | Revision B |
6.Remove the two screws (gold, CBS, M3x4) securing the shield plate, and then remove it toward the inside.
7.Disconnect the cable from the locking connector (push and release), remove the five screws (gold, CBS, M3x4), and then remove the Power Supply Board from the shield plate.
CBS Screws (M3x4)
Shield Plate
Figure 4-34. Power Supply Board
Figure 4-32. Power Supply Board Removal (1)
CBS Screws (M3x4)
Connector
CBS Screws (M3x4)
Figure 4-33. Power Supply Board Removal (2)
Assembly and Disassembly | Disassembly Procedures | 42 |
