EPSON Perfection 610 | Revision B |
4.2.7 Main Board Removal
1.Release the Carriage Lock. (See Section 4.2.1.)
2.Remove the Document Cover. (See Section 4.2.2.)
3.Remove the Upper Housing. (See Section 4.2.3.)
4.Slide the Carriage Unit slowly until you see the whole main board cover.
5.Remove the two screws (CBS, M3x4) securing the FFC fixing plate, and then remove the FFC fixing plate.
6.Remove the three screws (gold, CBS, M3x4/M3x6), release the two hooks at the rear edge, and then remove the main board cover.
6. Hooks
6. Main Board Cover
6. CBS Screw (M3x4) 
4. Carriage Unit
6.CBS Screws (M3x6)
5.CBS Screws (M3x4)
5. FFC Fixing Plate
Figure 4-26. Main Board Removal (1)
Assembly and Disassembly | Disassembly Procedures | 38 |
