EPSON Perfection 610 | Revision B |
7.Remove the screw (CP, M3x5) near the I/F connector and the one (CBS, M3x5) securing the Main Board.
8.Disconnect the following cables from the corresponding connectors; CR Motor - CN6, carriage FFC, Power Supply Board - CN4.
9.Remove the Main Board.
CP Screw (M3x5)
Figure 4-27. Main Board Removal (2)
Carriage FFC Connector
CN4 (Power Supply Unit)
CN6 (CR Motor) | CBS Screw (M3x5) |
|
Figure 4-28. Main Board Removal (3)
Figure 4-29. Main Board
Assembly and Disassembly | Disassembly Procedures | 39 |