Epson 810, 820, 830 Cut Sheet, Printing Area, SPECIFICATIONS, PRODUCT DESCRIPTION, Table 1-8.Printing area, Figure 1-3.Printable area for cut sheet

EPSON Stylus PHOTO 810/820/830Revision B

1.2.5	Printing Area		PW
1.2.5.1	Cut Sheet	LM		RM

Refer to the following table. As for each margin area, refer to Figure 1-3.

Table 1-8. Printing area

Paper size	Left margin	Right margin	Top margin	Black bottom margin
	(min.) **	(min.) **	(min.) **	(min.) **
A4	3 mm (0.12”)	3 mm (0.12”)	3 mm (0.12”)	14 mm (0.54”) / 3mm
				(0.12”) *
Letter	3 mm (0.12”)	3 mm (0.12”)	3 mm (0.12”)	14 mm (0.54”) / 3mm
				(0.12”) *
B5	3 mm (0.12”)	3 mm (0.12”)	3 mm (0.12”)	14 mm (0.54”) / 3mm
				(0.12”) *
Legal	3 mm (0.12”)	3 mm (0.12”)	3 mm (0.12”)	14 mm (0.54”) / 3mm
				(0.12”) *
Statement	3 mm (0.12”)	3 mm (0.12”)	3 mm (0.12”)	14 mm (0.54”) / 3mm
				(0.12”) *
Executive	3 mm (0.12”)	3 mm (0.12”)	3 mm (0.12”)	14 mm (0.54”) / 3mm
				(0.12”) *

*Bottom margin can be set to 3mm when the paper length is designated with “ESC (S” command). However, the printing quality is not guaranteed in the area, ranging from 3mm to 14mm, from the form lower end. When the paper length is not designated, the bottom margin must be wider than 14mm.

(Printable area A)

**When all margins (Left / Right / Top / Bottom) can be set to 0mm at minimum only when the “no margin” is checked on the printer driver. However, the printing quality is not guaranteed in the area, ranging from 0mm to 3mm, from the form lower end.

TM

Printable area A PL

Printable area B BM

Figure 1-3. Printable area for cut sheet

PRODUCT DESCRIPTION SPECIFICATIONS 12