Security Functions | 20 |
|
|
*Depending on the area of purchase, the User's Logo function may not be available for
fEntering the Password
When the password entry screen is displayed, enter the password using the numeric buttons on the remote control.
Procedure
Enter the password by using the numeric buttons.
When you enter the correct password, projection begins.
Attention
•If an incorrect password is entered three times in succession, the message "The projector's operation will be locked." is displayed for about five minutes, and then the projector switches to standby mode. If this happens, disconnect the power plug from the electrical outlet and then reinsert it and turn the projector's power back on. The projector displays the password entry screen again so that you can enter the correct password.
•If you have forgotten the password, make a note of the "Request Code: xxxxx" number that appears on the screen and contact the nearest address provided in the International Warranty Terms. sInquiries
•If you continue to repeat the above operation and input the wrong password thirty times in succession, the following message is displayed and the projector does not accept any more password entries. "The projector's operation will be locked. Contact Epson as described in your documentation." sInquiries
Restricting Operation (Operation Lock)
Do one of the following to lock the operation buttons on the control panel.
•Full Lock
All of the buttons on the control panel are locked. You cannot perform any operations from the control panel, including turning the power on or off.
•Operation Lock
All of the buttons on the control panel, except for the [Power] button, are locked.
This is useful at events or shows when you want to deactivate all buttons and only project, or at schools when you want to limit button operation. The projector can still be operated using the remote control.
Procedure
A Press the [Menu] button and select "Settings" - "Operation Lock" in the configuration menu. s "Using the Configuration Menu" p.23
Using the remote control | Using the control panel |