Problem Solving | 47 |
|
|
| f The remote control does not work |
|
|
|
Check | Remedy |
Is the remote control | Point the remote control towards the remote receiver. |
remote receiver on the projector when it is operated? | The operating angle for the remote control is about 30 horizontally, and about 15 vertically. |
| s Quick Start Guide |
|
|
Is the remote control too far from the projector? | The operating range for the remote control is about 6 m. s Quick Start Guide |
|
|
Is direct sunlight or strong light from fluorescent lamps | Set the projector up in a location where strong light does not shine onto the remote receiver. For |
shining onto the remote receiver? | 822, set the remote receiver to "Off" from "Remote Receiver" in the configuration menu. s"Settings"- |
| "Remote receiver" p.28 |
|
|
Is the correct setting for the remote receiver selected? | Check the "Remote Receiver" in the configuration menu. |
| |
|
|
Are the batteries dead or have the batteries been inserted | Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary. s p.51 |
correctly? |
|
|
|
Was a remote control button pressed for more than | If any of the buttons on the remote control are pressed down for more than 30 seconds, the remote control |
30 seconds? | stops sending signals (remote control's sleep mode). When the button is released, normal remote control |
| operation resumes. This can prevent the batteries from running down accidentally because Sleep Mode |
| operates when the remote control is stored in a bag or if an object is placed on top of it. |
|
|
f Mail is not received even if a problem occurs with the projector
Check | Remedy |
Is "Standby Mode" set to "Network On"? | To use the Mail Notification function when the projector is in standby, set "Network On" from "Standby |
| Mode" in the configuration menu. |
|
|
Did a fatal problem occur and the projector come to a sudden | When the projector comes to a sudden stop, mail cannot be sent. |
stop? | If the problem continues, contact your local dealer or the nearest address provided in the International |
| Warranty Terms. sInquiries |
|
|
Is power being supplied to the projector? | Check that your electrical outlet or power source is functioning correctly. |
|
|
Is the LAN cable connected correctly? | Check that the LAN cable is connected correctly. Reconnect it if it is not connected or it is not connected |
| |
|
|
Is "Mail" set correctly in the configuration menu? | Mail notification of problems is sent according to the "Mail" settings in the configuration menu. Check if it |
| is set correctly. s"Network |
|
|