Saving a User's Logo

D Move the box to select the part of the image to use as the user's logo.

Using the remote control

Using the control panel

q You can save at up to 400 ^ 300 dots in size.

58

E When"Yes"."Select this image?" is displayed, select F Selectscreen.the zoom factor from the zoom setting

G When the message "Save this image as the User'sLogo?" is displayed, select "Yes".

The image is saved. After the image has been saved, the message "Completed" is displayed.

• Saving the user's logo may take about 15 seconds. Do not q use the projector or any connected equipment while it is

saving. This may cause malfunctions to occur.

•Once a user's logo has been saved, the logo cannot be returned to the factory default.