Saving a User's Logo

You can save the image that is currently being projected as a user's logo.

Depending on the area of purchase, the User's Logo function may not be available for EMP-X5/S5. In that case, the user's logo cannot be saved.

q Whenerased.a user's logo is saved, the previous user's logo is

Procedure

A Project the image you want to use as the user's logo, and then press the [Menu] button.

Using the remote control

Using the control panel

57

B In"User'sthe configurationLogo". menu, select "Extended"- s "Using the Configuration Menu" p.23

Check the buttons you can use and the operations they perform in the guide under the menu.

• If "User's Logo Protect" from "Password Protect" is set q to "On", a message is displayed and the user's logo

cannot be changed. You can make changes after setting "User's Logo Protect" to "Off". s p.19

•If "User's Logo" is selected when Keystone, E-Zoom, Aspect, or Progressive are being performed, the function currently being performed is cancelled.

C When "Choose this image as the User's Logo?" is displayed, select "Yes".

When you press the [Enter] button on the remote control or q the control panel, the screen size may change as it changes

to the resolution of the image signal.