List of Functions

28

 

 

Settings Menu

For EMP-83/822For EMP-X5For EMP-S5

 

 

 

 

 

 

 

 

 

 

Sub Menu

Function

Keystone

You can correct vertical keystone distortion in images.s Quick Start Guide

 

 

Auto Keystone

Performs automatic keystone correction.

(EMP-83/822/X5

(This can only be specified when "Front" is selected from "Extended" - "Projection".)

only)

 

 

 

Zoom

Adjusts the image size.s Quick Start Guide

(EMP-S5 only)

Wide: Larger Tele: Smaller

 

 

Operation Lock

You can use this to restrict operation of the projector's control panel. s p.20

 

 

Brightness Control

You can set the lamp brightness to one of two settings.

 

Select "Low" if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When "Low" is

 

selected, the amount of electricity consumed and the lamp's operating life are changed as follows, and fan rotation noise during projection is

 

reduced. Electrical consumption: about a 35 W decrease, lamp life: about 1.5 times longer

 

 

Volume

You can adjust the volume.

 

 

Remote Receiver

You can limit the reception of the operation signal from the remote control.

(EMP-83/822 only)

When you want to prohibit operation by remote control, or if the remote receiver has a fluorescent light too close to it , you can make settings to

 

deactivate the remote receiver that you do not want to use or that is experiencing interference.

 

 

Test Pattern

When the projector is setup, a test pattern is displayed so that you can adjust the projection without connecting other equipment. While the test

(EMP-83/822 only)

pattern is displayed you can perform zoom adjustments, focus adjustments, and keystone correction.

 

To cancel the test pattern, press the [Esc] button on the remote control or the control panel.

 

 

Reset

You can reset all adjustment values in the "Settings" menu to their default settings.

 

To return all menu items to their default settings, see s p.35