Security Functions

fSetting Password Protect

Use the following procedure to set Password Protect.

Procedure

A Holdseconds.down the [Freeze] button for about five

The password protect setting menu is displayed.

Remote control

• If Password Protect is already activated, you must enter q theIf thepassword.password is entered correctly, the password protect

setting menu is displayed.

s "Entering the Password" p.20

•When the password is set, stick the password protect sticker in a visible position on the projector as a further theft deterrent.

B Turn on "Power On Protect".

(1)Select "Power On Protect", and then press the [Enter] button.

(2)Select "On", and then press the [Enter] button.

(3)Press the [Esc] button.

19

C Turn on "User's Logo Protect"*.

(1)Select "User's Logo Protect", and then press the [Enter] button.

(2)Select "On", and then press the [Enter] button.

(3)Press the [Esc] button.

D Turn on "Network Protect".

(1)Select "Network Protect", and then press the [Enter] button.

(2)Select "On", and then press the [Enter] button.

(3)Press the [Esc] button.

E Set the password.

(1)Select "Password", and then press the [Enter] button.

(2)When the message "Change the password?" is displayed, select "Yes" and then press the [Enter] button. The default setting for the password is "0000". Change this to your own desired password. If you select "No", the screen shown in step 1 is displayed again.

(3)Enter a four digit number using the numeric buttons. The number entered is displayed as "* * * *". When you enter the fourth digit, the confirmation screen is displayed.

Remote control

Numeric buttons

(4)Re-enter the password.

The message "Password accepted." is displayed.

If you enter the password incorrectly, a message is displayed prompting you to re-enter the password.