Security Functions

21

 

 

Check the buttons you can use and the operations they perform in the guide under the menu.

B Select either "Full Lock" or "Operation Lock".

C Selectdisplayed."Yes" when the confirmation message is

The control panel buttons are locked according to the setting you chose.

You can release the control panel lock by one of the q following two methods.

•From the remote control, select "Off" from "Settings" - "Operation Lock" in the configuration menu.

Anti-Theft Lock

As the projector is often setup on ceiling mounts and left in rooms unattended, it is possible that someone may try and take the projector, so the projector includes the following security devices.

•Security slot

The security slot is compatible with the Microsaver Security System manufactured by Kensington. You can find details about the Microsaver Security System on the Kensington homepage http://www.kensington.com/.

•Security cable installation point

A commercially available theft-prevention wire lock can be passed through the installation point to secure the projector to a desk or pillar.

fInstalling the wire lock

Pass an anti-theft wire lock through the installation point. See the documentation supplied with the wire lock for locking instructions.

•When you press and hold down the [Enter] button on the control panel for about seven seconds, a message is displayed and the lock is released.