List of Functions | 31 |
|
|
Network Menu (EMP-83/822 Only)
When "Network Protect" is set to "On" in "Password Protect", a message is displayed and the settings cannot be changed. You can make changes after setting "Network Protect" to "Off". s p.19
Sub Menu | Function |
Wired LAN | You can make network settings. |
| DHCP: You can set whether to use DHCP (On) or not (Off). |
| If this is set to "On" you cannot set any more addresses. |
| IP Address: You can input the IP address assigned to the projector.*1 |
| You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. |
| 0.0.0.0, 0.x.x.x, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) |
| Subnet Mask: You can input the Subnet Mask for the projector.*1 |
| You can enter a number from 0 to 255 in each field of the address. However, the following subnet masks cannot be used. |
| 0 to 254.x.x.x. 255.255.255.255 |
| Gateway Address: You can input the IP address for the gateway for the projector.*1 |
| You can enter a number from 0 to 255 in each field of the address. However, the following gateway addresses cannot be used. |
| 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) |
| MAC Address: You can input the MAC Address for the projector. |
|
|
PJLink Password | Enter a password to use when you access the projector using compatible PJLink software.*1 s p.69 |
| You can enter up to 32 alphanumeric characters. |
|
|
Web Control | Enter a password to use when making settings and controlling the projector using Web control.*1 You can enter up to 8 alphanumeric characters. |
Password | Web control is a computer function that allows you to set up and control the projector by using the Web browser on a computer on which EMP |
| Monitor is running. sEMP Monitor Operation Guide |
|
|