Epson 83 Rear (EMP-83/822Only), port, port, port, Speaker, LAN port, E RS-232Cport, D Power inlet, Audio Out port, G S-Videoinput, Audio-L/Rinput, Computer1 input

Part Names and Functions

Rear (EMP-83/822 Only)

A H G F

6

	Name	Function
E RS-232C port		When controlling the projector from a
		computer, connect it to the computer with an
		RS-232C cable. This port is for control use and
		should not normally be used. s p.67
F	Computer1 input	For video signals from a computer and
	port	component videog signals from other video
		sources.

B C D E

Audio1 input portComputer2 input port

Connect to the audio out port of the computer connected to the Computer1 input port.

For video signals from a computer and component videog signals from other video sources.

	Name	Function
A	Remote receiver	Receives signals from the remote control.
		s Quick Start Guide
B	Speaker
C	Monitor Out port	Outputs the image signal from the computer
		connected to the Computer1 input port to an
		external monitor. This is not available for
		component videog signals or other signals
		being input to any port other than the
		Computer1 input port.s p.61
	Audio Out port	Outputs the sound of the image currently being
		projected to external speakers. s p.61
D Power inlet		Connects to the power cable.
		s Quick Start Guide

	Audio2 input port	Connect to the audio out port of the computer
		connected to the Computer2 input port.
		s Quick Start Guide
G S-Video input		For S-videogsignals from video sources.
	port
	Video input port	For composite videog signals from video
		sources.
	Audio-L/R input	Connects to the audio out port of the
	port	equipment connected to the S-Video port or
		Video input port. s Quick Start Guide
H	LAN port	When a LAN cable is connected, you can
		monitor and control the projector over a LAN.
		s p.62