List of Functions

34

 

 

Info Menu (Display Only)

Lets you check the status of the image signals being projected and the status of the projector. Items displayed vary depending on the image signal currently being projected as shown in the following screen shots.

Computer image/Component videog

Composite videog/S-videog

 

 

 

 

 

 

Sub Menu

Function

Lamp Hours

You can display the cumulative lamp operating time*.

 

When it reaches the lamp warning time, the characters are displayed in yellow.

 

 

Source

You can display the input port name for the connected equipment currently being projected.

 

 

Input Signal

You can display the content of "Computer1" or "Computer2" set in the "Signal" menu according to the "Source".

 

 

Resolution

You can display the input resolution.

 

 

Video Signal

You can display the content of "Video Signal" set in the "Signal" menu.

 

 

Refresh Rateg

You can display the refresh rate.

 

 

Syncg Info

You can display the image signal information.

 

This information may be needed if service is required.

 

 

Status

This is information about problems that have occurred on the projector.

 

This information may be needed if service is required.

 

 

* The cumulative use time is displayed as "0H" for the first 10 hours. After 10 hours or more, one hour is added for each subsequent hour.