Epson 870 CHAPTER 4 PRINTABLE AREAS, 4.1 Printable Area – Stylus Photo

CHAPTER 4 PRINTABLE AREAS

4.1 Printable Area – Stylus Photo 870

The division of the paper between printing area and non-printing area is controlled by the values of A, B, C, D, E, G, and H, and by the dot unit (1 dot = 1/360 inch.). When printing near the top and bottom margins in MicroWeave, printing beyond the regions G and H below which the nozzles can project is not possibles.

Table 7 Printable area diagram.
Left margin non-printable area		Printing area	Right margin non-printable area
	A			C
		B
					Top margin non-printable area
						D
Area nozzle can
project when
processing top
margin						Printing area
						E
		P
Paper feed direction

F

Bottom margin non-printable area

EPSON Imaging Technology Center	Page: 14
Revision: 1	10/6/00