6.4Carriage return “ESC EM n”

Format:

ASCII ESC EM n

Hex 1B 19 6E

Decimal 27 25 110

Function:

Sets controls for paper loading/ejecting Range of Values for Parameters:

n=31H, 52H (="1", "R")

Function:

1)Control of the CSF (cut sheet feeder) is performed as follows, according to the value of n:

n=31H select bin 1 n=52H eject paper

2)If n has any value other than the above, this command is ignored.

3)ESC EM R is only valid for paper which has been fed from the CSF. For any other paper, this command is ignored.

4)Bin selection setting is valid from the next time paper is fed.

5)With ESC EM R, the printing position in the X direction is set to the origin on the X axis.

Initial State: -

Related Commands:

Commands related in the direction of applying an effect (Setting) None

Commands related in the direction of receiving an effect (Setting) Returned to initial state by the ESC @ command.

Commands related in the direction of applying an effect (Operation) None

Commands related in the direction of receiving an effect (Operation) None

EPSON Imaging Technology Center

Page: 24

Revision: 1

10/6/00