Epson 870 CHAPTER 6 INIDIVIDUAL COMMAND SPECIFICATIONS, 6.1Line feed “LF”

CHAPTER 6 INIDIVIDUAL COMMAND SPECIFICATIONS

6.1Line feed “LF”

Format:

ASCII LF

Hex 0A

Decimal 10

Function:

1)Advances the printing position in the Y direction from the current one in the positive Y direction by an amount equal to the current line separation amount. Sets the printing position in the X direction to the starting point (the left margin position) on the X axis of the position management coordinate system.

2)If this commands sets the Y direction printing position into the non-printable region, then the page is ejected, the position management coordinate system is set to the next page, and the printing position is set to the origin on this new position management coordinate system.

Initial State: - Related Commands:

Commands related in the direction of applying an effect (Setting) None

Commands related in the direction of receiving an effect (Setting) None

Commands related in the direction of applying an effect (Operation) None

Commands related in the direction of receiving an effect (Operation) The line advance amount is set by the ESC + commands. The non-printable region is set by the ESC (c commands.

The line advance amount, the non-printable region, and the left margin position are reset to their initial states by the ESC @ and ESC (G commands.

EPSON Imaging Technology Center	Page: 21
Revision: 1	10/6/00