Format:
ASCII FF
Hex 0C
Decimal 12
Function:
1)The contents of the print buffer are printed, the position management coordinate system is set to the next page, and the printing position is set to the origin on this new position management coordinate system.
In addition, if the next page does not exist, the paper is ejected.
2)With single sheet paper, this command is ignored if no paper is input.
Initial State: -
Related Commands:
Commands related in the direction of applying an effect (Setting) None
Commands related in the direction of receiving an effect (Setting) None
Commands related in the direction of applying an effect (Operation) None
Commands related in the direction of receiving an effect (Operation) The page length is set by the ESC (C commands.
The page length and the left margin position are reset to their initial states by the ESC @ and ESC (G commands.
EPSON Imaging Technology Center | Page: 22 |
Revision: 1 | 10/6/00 |