Set Roll Paper Mode “EX" 06H 00H 00H 00H 00H 00H 05H m1 |
|
|
|
| ||||||
Format: | E | X | 06H | 00H | 00H | 00H | 00H | 00H | 05H | m1 |
ASCII | ||||||||||
Hex | 45 | 58 | 06 | 00 | 00 | 00 | 00 | 00 | 05 | m1 |
Decimal | 69 | 88 | 6 | 0 | 0 | 0 | 0 | 0 | 5 | m1 |
Parameters: |
|
|
|
|
|
|
|
|
|
|
*The parameter m1 is a one byte binary format parameter, and this select the roll paper mode as follows:
m1 | Roll Paper Mode |
00H | Off |
01H | On |
02H to FFH | Reserved |
Function:
*Changes the roll paper mode the default environment to the value specified by m1.
*If the parameter is out of range (02H - FFH), this command is ignored, and the previous setting is maintained.
*This command is only valid in remote mode.
EPSON Imaging Technology Center | Page: 73 |
Revision: 1 | 10/6/00 |