Epson 870 6.37 Set <MOVX> unit to 1 dot <MOVXDOT>”

6.37 Set <MOVX> unit to 1 dot <MOVXDOT>”

Format:

<11100101>B

Range of Values for Parameters: - Function:

1)The unit set by the ESC (U command is taken as standard, and that unit is taken as

1unit for the MOVX command.

2)The printing position in the X direction is taken as the origin upon the X axis.

Initial State:

<MOVXDOT> is set. Related Commands:

Commands related in the direction of applying an effect (Setting) None

Commands related in the direction of receiving an effect (Setting) None

Commands related in the direction of applying an effect (Operation) None

Commands related in the direction of receiving an effect (Operation) The unit is set by the ESC (U command.

EPSON Imaging Technology Center	Page: 63
Revision: 1	10/6/00