Epson 870 ESC, 6.30 Select printing color “ESC r n”

6.30 Select printing color “ESC r n”

Range of Values for Parameters: 00H ≤ n ≤ 06H

Function:

1)The printing color is selected according to the value of n, as follows: if n=0: black

if n=1: magenta

if n=2: cyan

if n=4: yellow

2)If n has a value other than the above, this command is ignored.

Initial State:

Black selected.

Related Commands:

Commands related in the direction of applying an effect (Setting) None

Commands related in the direction of receiving an effect (Setting) The ESC @ command selects black.

Commands related in the direction of applying an effect (Operation) None

Commands related in the direction of receiving an effect (Operation) None

EPSON Imaging Technology Center	Page: 55
Revision: 1	10/6/00