Format: | ESC | $ | nL | nH | |
ASCII | |||||
Hex | 1B | 24 | nL | nH | |
Decimal | 27 | 36 | nL | nH | |
Range of Values for Parameters: | 0 ≤ | nL ≤ | 255 |
| |
Function: |
| 0 ≤ | nH ≤ | 127 |
|
|
|
|
|
| |
1)The printing position in the X direction is set to a position spaced in the positive direction by (256 x nH + nL) x (absolute horizontal position setting units) inches from the origin (the left margin position) on the X axis of the position management coordinate system.
2)If the left margin position + (256 x nH + nL) x (absolute horizontal position setting units) is past the right margin position, then this command is ignored.
Initial State: -
Related Commands:
Commands related in the direction of applying an effect (Setting) None
Commands related in the direction of receiving an effect (Setting) None
Commands related in the direction of applying an effect (Operation) None
Commands related in the direction of receiving an effect (Operation) Set the absolute horizontal units with the ESC (U command.
Reset the absolute horizontal position units with the ESC @ and ESC (G commands.
Return to the initial state using the ESC @ command.
EPSON Imaging Technology Center | Page: 25 |
Revision: 1 | 10/6/00 |