| 6.11 Set unit(extended) “ESC (U nL nH P V H mL mH” |
|
|
|
|
| ||||
Format: | ESC | ( | U | nH | P | V | H | mL | mH |
ASCII | |||||||||
Hex | 1B | 28 | 55 | nH | P | V | H | mL | mH |
Decimal | 27 | 40 | 85 | nH | P | V | H | mL | mH |
Range of Values for Parameters: nL=05H, nH=00H
P=( mH*256 + mL ) = 90, 120, 180, 360, 720, 1440 V=( mH*256 + mL ) = 90, 120, 180, 360, 720, 1440 H=( mH*256 + mL ) = 90, 120, 180, 360, 720, 1440
Function:
1)Set the following standard units in units of b/(mH*256+mL) inch: The H of parameter is horizontal position setting units
The V of parameter is vertical position setting units The P of parameter is page management units
2)This Command is effective only at the time of the graphic mode.
Initial State:
Page management units: 1/360 inch Relative horizontal position setting units: Absolute horizontal position setting units: Relative vertical position setting units:
Absolute vertical position setting units:
Related Commands:
1/180 inch units 1/60 inch units 1/360 inch units 1/360 inch units
Commands related in the direction of applying an effect (Setting) None
Commands related in the direction of receiving an effect (Setting) None
Commands related in the direction of applying an effect (Operation)
The units for the relative horizontal position setting by the ESC \,ESC( / command are set.
The units for the absolute horizontal position setting by the ESC $,ESC( $ command are set.
The units for the relative vertical position setting by the ESC (v command are set. The units for the absolute vertical position setting by the ESC (V command are set. The units for the "unit" unit page length specification by the ESC (C command are set. The units for the page format specification by the ESC (c command are set.
The units for the paper dimension specification by the ESC (S command are set. Commands related in the direction of receiving an effect (Operation)
The initial state is returned to by the ESC @ command.
EPSON Imaging Technology Center | Page: 31 |
Revision: 1 | 10/6/00 |