Follow these guidelines when the control panel lights

 

 

 

 

 

 

 

come on or flash:

 

 

 

 

 

 

 

 

P is on

The EPSON Stylus Scan is on and ready. It flashes when the

 

 

 

 

 

 

 

printer is receiving a file, warming up, printing, scanning,

 

 

 

 

 

 

 

copying, or in cartridge change mode.

 

 

 

 

 

 

 

 

S flashes

Paper is jammed in the feeder. Remove the paper and reload it.

 

 

 

 

 

 

 

If the light continues to flash, turn off the printer and gently pull

 

 

 

 

 

 

 

all paper out of the paper path. Then turn it back on and press

 

 

 

 

 

 

 

the E load/eject button.

 

 

 

 

 

 

 

 

S is on

You are out of paper. Load paper against the right side, then

 

 

 

 

 

 

 

slide the edge guide against the paper. Press the E load/eject

 

 

 

 

 

 

 

button to resume printing.

 

 

 

 

 

 

 

 

B or A flash

Your ink supply is low. Make sure you have a replacement

 

 

 

 

 

 

 

cartridge (black S020189, color S020191).

 

 

 

 

 

 

 

 

B or A are on

You need to replace the ink cartridge. Make sure you have a

 

 

 

 

 

 

 

replacement cartridge (black S020189, color S020191). See

 

 

 

 

 

 

 

page 111 for replacement instructions.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is on

A page or photo is jammed in the scanner, or some other scan or

 

 

 

 

 

 

 

 

 

 

copy error has occurred. Turn off the EPSON Stylus Scan, open

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the top cover, and remove the jammed document. Then close

 

 

 

 

 

 

 

the cover and turn the power back on.

 

 

 

 

 

 

 

 

P and S flash

Jammed paper may be blocking movement of the print head.

and

Turn off the printer, open the front cover, and remove any

B and A are on

paper. Then turn it on again. If the lights still flash, contact your

 

 

 

 

 

 

 

dealer or EPSON; see page 137 for contact information.

 

 

 

 

 

 

 

 

P S B A flash

Turn off the power. Check for any packing material, foreign

 

 

 

 

 

 

 

objects, or pieces of paper. Make sure there is enough space

 

 

 

 

 

 

 

around the rear vent. Then turn the power back on. If the lights

 

 

 

 

 

 

 

still flash, contact your dealer or EPSON; see page 137 for

 

 

 

 

 

 

 

contact information.

 

 

 

 

 

 

 

 

P S B A are off

When all the lights are off, the EPSON Stylus Scan is not

 

 

 

 

 

 

 

receiving power. Turn it off, make sure the power cord is

 

 

 

 

 

 

 

plugged in securely, and turn it back on.

 

 

 

 

 

 

 

Make sure the outlet is working and is not controlled by a

 

 

 

 

 

 

 

switch or timer. Try using another outlet.

 

 

 

 

 

 

 

 

120Solving Problems