note

If you’re using Mac OS 8.1 on an iMac, you need to install the iMac Update 1.0 before installing the EPSON Stylus Scan software. This update is available online from the Apple® Web site.

If you’re running Mac OS 8.5 or later, Apple recommends that you install the iMac Update 1.1.

Macintosh System Requirements

■iMac™ series or Power Macintosh® G3 with built-in USB port

■Mac® OS 8.1 or later (8.5 or later recommended)

■At least 32MB of available memory (64MB recommended)

■At least 50MB of free hard drive space (100MB recommended)

■VGA or better monitor (24-bit color recommended)

■Double-speed (2x) CD-ROM drive (quad-speed [4x] or faster recommended) for installing the printer software

■Available USB port or hub connection, with shielded USB “AB” interface cable, from Series A (computer) to Series B (EPSON Stylus Scan), up to 6.5 feet (2 m) long

caution

Don’t use an outlet that can be turned off by a wall switch or timer, or one on the same circuit as a large appliance. This may disrupt the power, which can erase the printer’s memory or damage its power supply.

Location Requirements

■Place the EPSON Stylus Scan on a flat, stable surface that extends beyond the base in all directions. The EPSON Stylus Scan will not operate correctly if it is tilted or at an angle.

■Avoid locations with high temperature or humidity, direct sunlight or dusty conditions, poor ventilation, subject to shock and vibration, or near sources of heat or electromagnetic interference, such as a cordless telephone base unit.

■Leave enough room around the EPSON Stylus Scan to allow for sufficient ventilation.

■Place the EPSON Stylus Scan near a grounded wall outlet where it can be easily unplugged.

Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée facilement.

140Notices