Something is missing or incorrect in the scanned image.

■If the scanned image is blank, make sure you feed your page or photo face down.

■If text is missing or incorrect, try adjusting the scan threshold in the TWAIN window. See page 63 for more information.

■If you’re scanning a document with a lot of graphics, text may not be recognized correctly by the OCR software.

■If you’re using the protection sheet, make sure it isn’t dirty or worn out. Make sure your original is straight and the sheet is inserted straight into the scanner.

■Make sure you select the Quality & de-screeningsetting in the TWAIN window.

You see one of these messages: Cannot find the scanner on the bus (Macintosh) or Scanner not ready (Windows).

■Make sure your EPSON Stylus Scan is turned on and securely connected to your computer or USB hub.

■Make sure your EPSON Stylus Scan is selected in the Chooser (Macintosh).

■Try restarting your computer. Make sure you turn on your EPSON Stylus Scan before you turn on your computer.

You see this message: The scanner is out of paper.

Make sure your page or photo is inserted correctly in the scanner. See page 20 for instructions.

When you try to copy on a Macintosh, your original is scanned but not printed.

Open the Chooser, select SS 2000, and turn on background printing. Then try copying again.

Solving Problems 133