Settings for Windows 2000/NT 6-9
Printing with NetBEUI
This section explains how to configure the network adapter for
NetBEUI using EpsonNet WinAssist or WebAssist.
Note:
To print with NetBEUI from Windows 2000, the NetBEUI protocol and
Client for Microsoft Networks must be installed; and to print with
NetBEUI from Windows NT 4.0/3.51, NetBEUI protocol and
Workstation must be installed on your computer. See “Installing the
NetBEUI Protocol” on page A-10 for instructions.
Configuring for NetBEUI using EpsonNet WinAssist
You can use the network adapter with the defaul t settings for
NetBEUI. If you want to change the default sett ings, use
EpsonNet WinAssist or WebAssist. The default values for
NetBEUI are as follows;
To configure the network adapter for NetBEUI , follow the steps
below.
Note:
❏TCP/IP or IPX must be installed on your computer.
❏Before following the steps below, you must have set the IP address
for the network adapter or logged in to the NetWare server’s NDS
context as an ADMIN.
1. Turn on the printer with the network adapter.
Items Default values
NetBIOS name EPxxxxxx
Workgroup name WORKGROUP
Device name EPSON