Settings for Windows 2000/NT 6-14
Workgroup Name:
Enter the workgroup name or domain name (up to 15
characters) used for the Windows network environment.
Device Name:
Enter the printer’s device name (up to 12 characters). LPT1,
LPT2, LPT3, and COM cannot be used.
4. Click SUBMIT and enter the password to update the settings.
The same password is required for EpsonNet WinAssist,
MacAssist, and WebAssist. See “Password” on page 10-30 for
information on setting the password.
5. If the message “Configuration change is complete!” appears
on your screen, the update is complete. Do not exit the Web
browser and do not send a job to the printer until this message
appears. Then, follow the on-screen instructions to reset the
printer.