Settings for NetWare 4-49
For local networks with a primary server
Even if a primary server is installed on the local network, an
unnecessary dial-up may be generated depend ing on the
configuration.
The following problems are common to both Print Server mode
and Remote Printer mode.
❏When the power is turned on
Since access is made only to the primary server, no dial-up is
generated.
❏When the network adapter is not correctly set
Since access is made only to the primary server, no dial-up is
generated. However, if the file server/print serve r of the
remote network is erroneously set as the pr imary server, an
unnecessary dial-up might be generated. Correct the settings
to avoid this problem.
❏During normal operation (standby/printing)
Since access is made only to the primary server, no dial-up is
generated.
❏When the primary server is down during operation
Connection to the primary server is periodic ally attempted,
but no dial-up is generated. However, if the router is set to
pass SAP packets (Find Nearest Server), an unnecessary dial-
up might be generated. To avoid this, turn off the p rinter once,
or do not allow the router to pass SAP packets (Find Nearest
Server).
Local network
Printer
Dial-up
router Dial-up
router
File server
(print server)
Remote network
Primary file server
(primary print server)