Epson C82378 Selecting a Printer to Monitor

EPSON Status Monitor 2 (Windows only) 12-10
8. Select Allow monitoring to monitor Windows shared
printers. Select Do not allow monitoring to not monitor
Windows shared printers. Click Next.
Note for Win 98/95:
The screen shown below does not appear in Windows 98/95.
9. Check the current settings and click Next. The installation
program will start installing the necessary files. Follow the
on-screen instructions.
10. When the Setup Complete dialog appears, select Yes and click
Finish to restart Windows.
Selecting a Printer to Monitor
Before monitoring a LPR printer with EPSON St atus Monitor 2,
you need to select the printer in your operating system. Follow
the steps for your operating system: Windows 98/95, “Setting Up
Your Printer” on page 11-3; Windows 2000, “Printing via
Standard TCP/IP Port Monitor in Windows 2000” on page 6-2;
NT 4.0, “Printing via LPR port in Windows NT 4.0” on page 6-5;
and NT 3.51, “Printing via LPR port in Windows NT 3.51” on page
6-6.
Note:
The network adapter’s IP address must be set; otherwise the printer does
not appear on the screen. For instructions on setting the IP address for
the network adapter, see Chapter 3, “Setting the IP Address.”