Settings for Windows 98/95 5-5
6. Enter your password (up to 20 characters) and click OK to
save settings. If you are entering a password for the first time,
click Change and set the password. For more information
about passwords, see “About passwords” on page 10-7.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting Refresh from the View
menu.
cCaution:
Since it takes 2 or 3 minutes to send new settings to the
network adapter, you must wait until the on-screen message
appears before turning off your printer.
Configuring for NetBEUI using EpsonNet WebAssist
Note:
❏A web browser must be installed in your computer.
❏TCP/IP must be correctly set for the computer and network adapter.
❏Do not operate EpsonNet WinAssist and EpsonNet WebAssist for
the printer at the same time.
❏There are some restrictions on the characters you can use depending
on your browser. For details, see your browser or OS
documentation.
1. Turn on the printer with the network adapter.
2. Run EpsonNet WebAssist by either of the methods described
below.
❏Run EpsonNet WinAssist. Click the printer you want to
configure from the list and click the Launch Browser
button.