Settings for Windows 2000/NT 6-12
5. After making the settings, click OK. The Password dialog box
appears.
6. Enter your password (up to 20 characters) and click OK to
save the settings. If you are entering a password for the first
time, click Change and set a password. For more
information about passwords, see “About passwords” on
page 10-7.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting Refresh from the View
menu.
cCaution:
Since it takes 2 or 3 minutes to send new settings to the
network adapter, you must wait until the on-screen message
appears before turning off your printer.
Configuring for NetBEUI using EpsonNet WebAssist
You can configure the network adapter for NetB EUI using
EpsonNet WebAssist.
Note:
❏A web browser must be installed in your computer.
❏TCP/IP must be correctly set for the computer and network adapter.
❏Do not operate EpsonNet WinAssist and EpsonNet WebAssist for
the printer at the same time.
❏There are some restrictions on the characters you can use depending
on your browser. For details, see your browser or OS manual.