Easy Setup Configuration 2-5
10. Confirm your settings and click Send.
If you have set a password for the network adapter, the
Password dialog box appears. Enter your password (up to 20
characters) and click OK to save your settings. Follow the on-
screen instructions.
cCaution:
It takes two or three minutes to send new settings to the
network adapter. Do not turn off your printer until an on-
screen message appears instructing you to do so.
Starting Easy Setup from the Start Menu
If you have already installed EpsonNet WinAssist on your
computer, you can start EpsonNet WinAssist Easy Setup from the
Start menu.
Click Start, point to Programs and then to EpsonNet WinAssist,
then click EpsonNet EasySetup. The EpsonNet WinAssist Easy
Setup dialog box appears. Click Next, then go to step 4 in “Starting
Easy Setup from the CD-ROM” on page 2-2 for detailed
instructions on using EpsonNet WinAssist Easy Setup.