The EpsonNet Configuration Utility 10-7
Setting menus

About passwords

A password is required to configure the network adapter. When
you click OK in the setting dialog box or click the Return to
default button, the Password dialog box appears.
1. To set a password or to change the current password, click
Change.
2. In the Administrator password dialog box, enter a password
(up to 20 characters) and click OK. Passwords are case
sensitive.
Note:
❏The same password is used for EpsonNet WinAssist,
MacAssist, and WebAssist.
❏Since the new password becomes effective after sending the data
to the network adapter, enter the old password immediately after
changing the password.
❏If you forget your password, you need to initialize the network
adapter. See “Initializing the Network Adapter” on page 1-6 for
instructions.