Settings for Windows 2000/NT 6-2
Printing with TCP/IP
This section explains how to set up the p rinter for use in a TCP/
IP environment.
Note:
❏If you have not set the IP address for the network adapter, see
“Setting the IP Address Using EpsonNet WinAssist/MacAssist”
on page 3-2 for instructions.
❏Be sure that the TCP/IP protocol is installed in your computer. See
“Installing TCP/IP Protocols on Your PC” on page A-1 for
instructions.

Printing via Standard TCP/IP Port Monitor in Windows 2000

When using the printer on a TCP/IP network in Windows 2000,
follow the steps below to connect the network pri nter to your
computer using Standard TCP/IP Port Monitor.
Setting up your printer
1. Make sure the printer is turned on.
2. Click Start, point to Settings, and then click Printers.
3. Double-click Add Printer to start the Add Printer wizard, and
then click Next.
4. Click Local printer, clear the Automatically detect my
printer check box, and then click Next.