Getting Started 1-3
You cannot print a status sheet if the printer has started printing,
if it is off-line, or if it is not ready to print.
Note:
If the printer does not print a status sheet, make sure that the printer is
on-line and no print jobs are being processed, then wait a minute. If it
still does not print a status sheet, turn the printer off, wait until the
status lights go out, and turn it on again.
cCaution:
After turning off the printer, wait until the status lights go out
before turning it back on; otherwise the network adapter may not
work correctly.
Network connectors
The network adapter can detect which kind of cable is attached.
You do not need to make any hardware or software settings to
specify the cable type.
RJ-45 connector:
Connect a Category-5 shielded twisted pair cable to the RJ-45
connector on the network adapter. You can use this cable for both
10BaseT and 100BaseTX.
DC-IN connector:
Plug the AC adapter into the network adapter’s DC-IN connector.
cCaution:
❏You must use a Category-5 shielded twisted-pair cable to
connect the network adapter to prevent malfunctions.
❏You must use the AC adapter shipped with this package.