Transporting the Printer

If you need to transport your printer some distance, carefully repack it using the original box and packing materials as described below.

wWarning:

Even when you need to carry the printer only a short distance, do not carry it by yourself. The printer should always be carried by two people holding the printer at the bottom.

1.Turn off the printer and remove any paper loaded in the printer. If any printer options are installed, remove them.

2.Unplug the power cord from the electrical outlet and the back of the printer. Disconnect the interface cable from the printer.

3.Remove the ribbon cartridge.

4.Install the protective materials onto the printer as shown on the Notice Sheet.

5.Repack the printer, ribbon cartridge, and power cord in the original packing materials and place them in the printer’s original box.

7

Maintenance

Maintenance and Transportation 7-5