8.Close the sprocket covers.

9.Adjust the two sprockets until the paper is straight and smooth, and then lock the sprockets into place.

cCaution:

Be sure the sprockets are not too far apart. Your paper could jam if they pull the paper too tightly or tear the edges of the paper holes. To remove any excess tension in your paper, release the right sprocket and lock it again.

10.Adjust the top-of-form position as described in Chapter 3, if necessary.

11.Close the top cover. Press the LF/FF Load button to feed the paper out the back of the printer. Make sure the edge of the first sheet emerges below the paper separator.

6-8Using Printer Options