This button can also be used to run the printer’s NLQ self test. See “Printing a Self Test” in Chapter 8.

cCaution:

Never press the Tear Off button when labels are loaded in the printer. Use the LF/FF Load button to feed the printed labels to a point where they can be torn off.

LF/FF Load

LF advances paper one line at a time. To

 

feed your paper forward one line, press

 

this button once.

 

FF advances continuous paper to the top of

 

the next page. Press and hold the button

 

for about one second.

 

Load loads paper on the push tractor of

 

the selected paper path when no paper is

 

currently loaded.

 

This button can also be used to run the

 

draft self test. See “Printing a Self Test” in

 

Chapter 8.

Micro Feed

These two buttons advance or reverse the

 

loaded paper in 1/216-inch increments.

 

The top button advances the paper and the

 

bottom button reverses it. You can use

 

these buttons to adjust the top-of-form,

 

tear-off, and printing positions.

 

To reset the top-of-form position, press

 

the TOF button to enter top-of-form mode.

 

Then use the Micro Feed buttons to move

 

the paper to the desired position. See

 

“Adjusting the top-of-form position” in

 

Chapter 3.

4-6Using the Printer