The printer sounds like it is printing, but nothing prints.

Cause

What to do

The ribbon cartridge is not

Install the ribbon cartridge as

installed properly.

described in Chapter 1.

 

 

The ribbon is worn out.

Replace the old ribbon cartridge with

 

a new one as described in Chapter 7.

The printer makes a strange noise, and the printer stops abruptly.

Cause

What to do

The paper is jammed.

See page 8-19 to clear the paper jam.

 

 

The ribbon is jammed

Remove any slack from the ribbon by

because of too much slack or

turning the ribbon-tightening knob or

a worn ribbon.

replace it with a new one. Then press

 

the Pause button to resume printing.

You did not remove all protective materials.

Remove all protective materials after turnning off the printer. Then turn on the printer.

The printer stops printing and the Pause light is flashing.

Cause

What to do

The print head is overheated. Wait a few minutes; the printer will resume printing automatically once the print head cools.

8-14Troubleshooting