22
Connecting to a Video Source

Projecting Composite Video Images

Use the accessory A/V cable to connect the video source to the Video port
at the rear of the projector.

Projecting S-Video Images

Use a S-Video cable (commercially-available) to connect the video source
to the S-Video port at the rear of the projector.
CAUTION
When connecting the projector to other video sources, take the
following precautions.
• Turn off the power for both the projector and the video source before
connecting them. If the power for either device is on at the time of
connection, damage may result.
• Check the shapes of the cable connectors and the device ports before
making the connections. If you try to force a connector to fit a device
port with a different shape or number of terminals, a malfunction or
damage to the connector or port may result.
To video output port
(yellow)
To Video port (yellow)
A/V cable (yellow)
(accessory)
To audio output
port p.24
To Audio 2 port
p.24
TIP
If more than one external component is connected to the projector,
use the [Source] button on the projector's control panel or the [S-
Video/Video] button on the remote control to select the Video port as
the input source. p.28
S-Video cable
(commercially-available)
To S-Video port
To S-Video output port
TIP
If more than one external component is connected to the projector,
use the [Source] button on the projector's control panel or the [S-
Video/Video] button on the remote control to select the S-Video port as
the input source. p.28