69
When the Indicators Provide No HelpWhen the Indicators Provide No Help
Only part of the image is displayed (Large/small)
Has the "Aspect Ratio " setting been
selected correctly?
Use the "Aspect Ratio" command in the "Video" menu to set the aspect ratio to
"4:3".
p.48
Is the E-Zoom function being used to
enlarge the image?
Press the [ESC] button on the remote control to cancel E-Zoom. p.43
Has the "Position" setting been
adjusted correctly?
Use the "Position" command in the "Video" menu to adjust.
p.45, p.47
Has the correct resolution been
selected?
Set the computer so that the signals that are output are compatible with this
projector. Refer to the documentation provided with your computer for details on
changing the settings. p.91
Change the resolution for the laptop
computer or computer with a LCD
screen.
Change the resolution so that the image is displayed in the whole of the projection
area, or set the image signal to external output only. p.28
Has the computer been set for dual
display?
If dual display has been activated in the Display Properties of the connected
computer's Control Panel, the projector will only display about half of the image
on the computer screen. To display the whole of the image on the computer screen,
turn off the dual display setting. Refer to the video driver manual for the
computer's monitor for further details.
Only part of the
image is displayed
Small