66
When the Indicators Provide No HelpWhen the Indicators Provide No Help
No images appear (Messages do appear)
Check the mode which corresponds to
the frequency of the image signals
being output from the computer.
Refer to the documentation provided with your computer for details on changing
the resolution and frequency of the image signals being output from the computer.
p.91
Are the cables connected correctly? p.16–p.23
Does the input signal match the
connected source?
Use the [Source] button on the projector's control panel (or the [Computer] or [S-
Video/Video] button on the remote control) to select the correct signal source.
p.28
Is the power for the computer or video
source turned on?
p.27
If a laptop computer or a computer
with a LCD screen has been
connected to the projector, it is
necessary to output the image signals
to the projector rather than to the
screen.
Normally image signals are output to only the computer's LCD screen, so you need
to change the output to an external destination. For some computer models, when
the image signals are output externally, they no longer appear on the LCD screen.
For details, refer to the section of the documentation provided with your computer
under a heading such as "External output", "Connecting an external monitor" or
similar. p.28
"Not Supported." is
displayed
"No-Signal." is
displayed