71
When the Indicators Provide No HelpWhen the Indicators Provide No Help
Images appear greenish/Images appear purplish
No sound can be heard.
Do the input signal settings match the
signals from the connected device?
If the "Input Signal" command in the "Video" menu is set to "Computer" when a
component video signal source is connected to the projector, the images will
appear greenish. If the "Input Signal" menu command is set to "Component Video
(YCbCr )" or "Component Video (YPbPr )" when a computer is connected, the
projected images will appear purplish. Select the correct signal format for the
connected source.
"Video" - "Input Signal" p.48
Is the audio source connected
correctly?
p.18, p.24
Has the correct audio input port been
selected?
"Audio" - "Audio Input" p.49
Has the volume been adjusted to the
minimum setting?
p.49
Is A/V Mute mode active? The projector may be in A/V Mute mode. Press the [A/V Mute] button on the
remote control to cancel the A/V Mute.
p.40