29
Turning Off the Projector
Follow the procedure below to turn off the power of the projector.
PROCEDURE
Turn off the power for the signal sources that are
connected to the projector.
Check that the power for all connected components has been
turned off.
Press the [Power] button on either the projector's
control panel or the remote control.
The following confirmation message will appear.
If you do not want to turn off the power, press any button except
the [Power], [Page down] or [Page up] button.
If you do not press any button, the message will disappear
automatically after seven seconds. (The power will not turn off
at this time.)
Press the [Power] button once more.
The lamp will switch off. The Power indicator will flash orange
and cool-down will start.
The cool-down period lasts for about 20 seconds.
When cool-down is complete, the Power indicator lights
orange.
1
2
Color Mode
Computer
Menu A/V Mute
E-Zoom
Freeze
S-Video/Video
Page upPage down
Power
Projector Remote control
Power OFF?
Yes :Press button
No : Press any other button
3
S
t
ops
fl
as
hi
ng an
d
li
g
ht
s orange
TIP
The projector's control panel and remote control buttons cannot be
operated while the Power indicator is flashing orange. Wait until it
lights steadily.