68
When the Indicators Provide No HelpWhen the Indicators Provide No Help
Are the cables connected correctly? p.16–p.23
Has the correct resolution been
selected?
Set the computer so that the signals that are output are compatible with this
projector. Refer to the documentation provided with your computer for details on
changing the settings. p.91
Have the "Sync. ", "Tracking " and
"Position" been adjusted correctly?
If the "Auto Setup" command in the "Video" menu is set to "OFF", press the
[Auto] button on the remote control to adjust these settings. If the images have not
been correctly adjusted after using the automatic setup function and after pressing
the [Auto] button, adjust the settings manually using the respective menus.
p.35, p.45
Is an extension cable being used? If an extension cable is used, electrical interference may affect the signals. Use the
accessory cables and check if this helps.
Are the image signal format settings
correct?
If a computer, component video or RGB video source is connected to the
projector, use the "Input Signal" command in the "Video" menu to select the signal
format which matches the signal connected source. p.46, p.48
If a composite video or S-Video source is connected to the projector, use the
"Video Signal" command in the "Video" menu to select the video signal format.
p.48
••���
•Image is distorted
•••
•Image contains
interference