33
Adjusting the Screen Image
PROCEDURE
While pressing the two foot adjust buttons at either side,
lift up the front of the projector so that the front adjustable
feet can extend.
Extend the front adjustable feet until the desired angle is obtained,
and then release the foot adjust buttons.
To retract the front adjustable feet, gently push down on the projector
while pressing the two foot adjust buttons.
TIP
• Automatic keystone correction is not carried out when the "Rear" or
"Ceiling" commands in the "Advanced" menu are set to "ON".
• If you would like to make further adjustments after automatic
keystone correction has been carried out, you can use the [keystone]
button on the projector's control panel. p.34
• When keystone correction is carried out, the projected image will
become smaller.
• If the images become uneven in appearance aft er keystone correction
is carried out, decrease the sharpness setting. p.45, p.47
• If automatic keystone correction is not required, set "Auto
Keystone" in the "Setting" menu to "OFF". p.50
Foot adjust buttons (side)
TIP
If the projector is tilted horizontally, turn the bases of the front
adjustable feet to adjust the angle.
Extend Retract
Front
adjustable foot